Cable Puller 10, 000 lbs
The only 2 speed puller on the market that can shift from high speed/low load pulling to low speed/high load pulling with a simple double tap motion on the foot pedal control switch. Use for cable pulls requiring high as well as low pulling loads. The no-load high speed is 16 FT/MINT and is best suited for loads up to 4000 LB where the speed will be 12 FT/MINT.
Cable Puller Specifications Sheet
Description
Technical Specifications
- Load: 0 – 6500.000 LB (0 – 28.900 KN) Continuous Operation, 6500.000 – 8000.000 LB (28.900 – 35.600 KN) 15 Minutes ON/15 Minutes OFF, 8000.000 – 10000.000 LB (35.600 – 44.500 KN) Momentary
- Cable Type: Electrical Cable
- Voltage Rating: 115 Volts
- Mounting: Mobile versi Boom
- Prime Mover Specification: Required Rope: 7/8″ diameter, double-braided, polyester composite Average Breaking Strength: 143 kN (32,000 lb) minimum
- Type: Puller Assembly
- Accessory: 00563 Adapter Weldment – 2.000 (UT8), 00565 Adapter Weldment – 3.000 (UT8), 00567 Adapter Weldment – 4.000 (UT8), 00610 Adapter Weldment – 5.000 (UT8)
- Application: Electrical Cable pull
- Capacity: The no-load low speed is 9 FT/MINT and can be used on loads up to 8000 LB where the speed will be 6 FT/MINT, or a momentary peak capacity of 10000LB
- Amperage Rating: 20 Amp
